Turtlerock Forum

Hey Gents,

Just clearing out what has affectionately become known as "the box of best intentions".

SOLD 4x Neve style machined aluminium red knobs. Very slightly scuffed. They secure via two grub screws (1 of the knobs is missing 1 grub screw). - $12 for the lot.
https://www.dropbox.com/s/5t8uwbhky4uccip/neveknob.JPG

SOLD 8x Poor Man's Pultec PMEQP1A PCBs. The project is here: http://groupdiy.com/index.php?topic=44213.0. The PCB's simplify the construction of a stepped pultec style EQ - each PCB would house 1 filter with frequency selection via lorlin switch. $20 for the lot.
https://www.dropbox.com/s/6d6snojdyax59sl/pmeq.JPG

SOLD 2x mono PICO compressor PCBs. No longer available - $10 each.
https://www.dropbox.com/s/c2g483s9zza068p/pico.JPG

1x GSSL sidechain high pass filter PCB - $5.
https://www.dropbox.com/s/rto6tcbiama7wpb/gsslsc.JPG

2x Lundahl LL1527 transformers. Used, but test correctly for continuity. In great shape with clean PCB pins. Buy both and I'll throw in a LL1540 as well (no idea if it works or not). $30 each.
https://www.dropbox.com/s/9dq05lqlhu7bpyt/lundahl.JPG

SOLD 2x Harbuch AT-124 mic input transformers. 200:20k. Absolutely new can style including mounting bracket. $30 each.
https://www.dropbox.com/s/w5x18v3v6fvrbkw/harbuch.JPG

SOLD 2x Altronic M0705 can transformers. 600:10k... would suit a NYdave reamp. $5 each.
https://www.dropbox.com/s/fgotpl8vmf7zfmd/altronics.JPG

SOLD 1x Simon Systems RDB-400 4 channel DI. Works and sounds great but is now surplus to my needs. It is an active DI that will take instrument signals straight to line level. It is missing 1 knob though. $300.
https://www.dropbox.com/s/cvn85zrt69gpspt/simondi.JPG

Stuff is located in Alexandria in Sydney. Pickup welcome!

Hi I am interested in the Pultec pcb's and the Harbusch mic input transformers.
Cheers,
Paul

Drop me a PM, Paul!

I want those knobs!

Hi, I'll take the 2x Harbuch AT-124 mic input transformers. PM for times to pick up and pay.

Hey gents!

A bunch of PMs have been received. I'll work through them and another bunch I have on group diy and shoot you all a reply tomorrow!

I'll take both of the pico pcbs if you still have them. I'll pm.

Hi i will take the 1x GSSL sidechain high pass filter PCB. 0410 759455 Khesrow thanks

If the knobs are still around I'll have those too please...

Thanks.

Hey guys! Sorry for my tardiness in updating this thread.

A bunch of stuff has sold.

Don't suppose you want to sell the Vocal Stressor that's in the photo with the D.I.s??
Paul

Quite the opposite, Paul.

I am looking for a second one!

Me too!

Does yours have input and output transformers Paul?