SOLD: Valley People PR10a racks
Posted: Wed Aug 20, 2014 2:10 pmGentlemen and Lady,
Here it starts - first up for sale are these 2 x Valley People racks with modules as follows:
Item 1 (the middle unit in the photo)
1 x PR10a chassis with:
4 x Gain-Brain II compressors (the black face ones)
4 x Maxi-Q EQs (the black faced ones)
2 x blanking panels
This chassis has all XLR connectors on the rear (In, Out, Key) and is a 110v unit, so you'll need a stepdown transformer
One of the Maxi-Qs definitely needs a re-cap
Two more of the Maxi-Qs may also as the LED glimmers dimly
Because of these 2 faults I'm only after SOLD for this unit
Item 2 (the bottom unit in the photo)
1 x PR10a chassis with:
10 x Kepex II compressors (limiters)
This chassis has all XLR connectors on the rear (In, Out, Key) and is a 110v unit, so you'll need a stepdown transformer
I'm after $SOLD for this unit
Front:
https://dl.dropboxusercontent.com/u/991 ... 0x%202.jpg
Rear:
https://dl.dropboxusercontent.com/u/991 ... 20rear.JPG
Here it starts - first up for sale are these 2 x Valley People racks with modules as follows:
Item 1 (the middle unit in the photo)
1 x PR10a chassis with:
4 x Gain-Brain II compressors (the black face ones)
4 x Maxi-Q EQs (the black faced ones)
2 x blanking panels
This chassis has all XLR connectors on the rear (In, Out, Key) and is a 110v unit, so you'll need a stepdown transformer
One of the Maxi-Qs definitely needs a re-cap
Two more of the Maxi-Qs may also as the LED glimmers dimly
Because of these 2 faults I'm only after SOLD for this unit
Item 2 (the bottom unit in the photo)
1 x PR10a chassis with:
10 x Kepex II compressors (limiters)
This chassis has all XLR connectors on the rear (In, Out, Key) and is a 110v unit, so you'll need a stepdown transformer
I'm after $SOLD for this unit
Front:
https://dl.dropboxusercontent.com/u/991 ... 0x%202.jpg
Rear:
https://dl.dropboxusercontent.com/u/991 ... 20rear.JPG
