Page 1 of 1

STUDIOMASTER SERIES 5 16-8-2

PostPosted: Tue Jun 29, 2010 1:37 am
by Mark Kelson
Any of you guys have any thoughts on this desk, I've read some good things...

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Fri Jul 02, 2010 11:41 am
by Chinagraf
Hi Mark, unless it's very cheap I would probably pass. It's been a long time but from memory not a very open sounding desk. They are built very solidly, but are really noisy. Maybe could be modded but I don't really know.
Can you try it out first?

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Fri Jul 02, 2010 12:46 pm
by waitup
As with most desks of this style and age you will have the usual problems to contend with... noise, will need re-capping most likely, scratchy pots etc.

BUT,

It should sound better than your behringers etc when it comes to its EQ, its summing etc.

Bottom line is if you are after a mixer, you can fathom the idea of getting your hands a little dirty to get it back up to spec, this one fits the features you need AND you find one cheaply then you can't go too wrong, really.

At the same time, don't limit yourself to this models. Mixers, particularly from this era, go for criminally cheap, all the time.

Nick.

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Mon Jul 05, 2010 8:29 pm
by Mark Kelson
hey guys really appreciate the feedback, I am looking for an older cheaper desk to mess around with, this went on ebay for around 300, i didnt pick it up, i think with desks this age it is probably safer to see them, so the search continues! cheers!

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Mon Jul 05, 2010 9:21 pm
by waitup
Yeah it's definitely good if you can check it out before you buy, check all the inputs work and that nothing is out of order. Good luck with the hunt!

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Mon Jul 05, 2010 11:14 pm
by Chinagraf
Hey MAry,
at $300 it wouldn't have been too much of an outlay to mess with that sort pf setup. I thought you were talking about more cash. If you aren't in a mega hurry and could save a little so you get up to 1K you can get something that you won't want to sell in 6 months time. There have been some crazy deals here and there, you just have to keep watching the skies..but yeah make sure you can check whatever you buy first. Still nothing wrong with a few bits not working, long as you're prepared to learn how to fix them and parts are available. But then that becomes addictive. You get hooked on the solder fumes.

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Tue Jul 06, 2010 2:09 am
by Kurt
Was that the one in Young? I nearly bid on it myself. A long way for you to drive to pick it up though...

Mark Kelson wrote:hey guys really appreciate the feedback, I am looking for an older cheaper desk to mess around with, this went on ebay for around 300, i didnt pick it up, i think with desks this age it is probably safer to see them, so the search continues! cheers!

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Tue Jul 06, 2010 10:13 am
by waitup
Chinagraf wrote:There have been some crazy deals here and there, you just have to keep watching the skies



It's true, some great mixing consoles have disappeared around here for next to nothing!

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Tue Jul 06, 2010 10:22 am
by Chinagraf
Did I call you Mary? WTF is up with that? K is nowhere near Y on the keyboard. I shouldn't start drinking so early maybe.
Apologies Mark.
Cheers.

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Tue Jul 06, 2010 1:18 pm
by Mark Kelson
haha yea man, first time ive been called mary, we will put it down to the booze haha

Re: STUDIOMASTER SERIES 5 16-8-2

PostPosted: Fri Jul 09, 2010 1:57 am
by 13thbeach
Chinagraf wrote:Did I call you Mary? WTF is up with that? K is nowhere near Y on the keyboard. I shouldn't start drinking so early maybe.
Apologies Mark.
Cheers.


Haha! Nice one Mandy.