Yesterday morning some bastard stole my motorbike and that is spurring me on to sell some stuff and try to get a replacement... I'm keen to move this stuff so go ahead and make me an offer or trade me a bike.
UREI la12 stereo comp with the excellent peak/average detector for altering the response of the compressor. very underrated units and can be used on vocals, through to the mix buss. $750 (sold pending payment)
SPL MTC monitor controller. These are great! neutral sounding, lots of options and a good sounding headphone amp. With talkback, cue mix etc etc. perfect for a project studio or a non-desk studio. I replaced the knob (not the pot) with a lovely old bakelite unit and will change it back if you don't want that but I think it looks and feels much better this way and for something you use all the time that matters. $750 (sold)
a pair of ADM 1540 eqs, vintage units with 4 bands of stepped inductor eq. 3 points top and bottom, 4 points on the mids. I'll even throw in output transformers to balance the units. $200 each! (sold)
Pairs 3 band eqs custom designed and built by Deane Jensen of Jensen Transformers for a 70's band called Up With People. I bought them from Indigo Ranch (!) where they had a console full of these on Protools returns. I've a few pairs left over after parting out the console and racking a lot of the modules. I want the remaining ones out to a good home so $100 per pair!(2 pairs sold but more available)
- It is currently Wed Jul 29, 2026 11:22 pm • All times are UTC + 10 hours [ DST ]
autumn cleaning sale
Moderators: rick, Mark Bassett
4 posts
• Page 1 of 1
autumn cleaning sale
You do not have the required permissions to view the files attached to this post.
Last edited by mylesgm on Fri Mar 13, 2015 9:19 pm, edited 1 time in total.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: autumn cleaning sale
a full set of built 1176-2 parts rev D with everything other than the mains transformer. MNATs pcbs, altran transformers, VUs, pots etc. You need a case and hardware. Was planning on building a top notch stereo unit with the best matched components but it's been on the shelf for too long and doesn't fit my portable kit now... 750
4x AAD speakers (passive) and 1x AAD sub (active) has grill cloth but removed to show driver. Basic but decent hifi system used for 4ch surround installation. Sounded pretty good, has sat in boxes for a few years after doing a number of shows. $200 for everything! (sold)
1x NOS NS10 woofer. Still in full factory plastic wrapping/box. $90 (sold)
4x AAD speakers (passive) and 1x AAD sub (active) has grill cloth but removed to show driver. Basic but decent hifi system used for 4ch surround installation. Sounded pretty good, has sat in boxes for a few years after doing a number of shows. $200 for everything! (sold)
1x NOS NS10 woofer. Still in full factory plastic wrapping/box. $90 (sold)
You do not have the required permissions to view the files attached to this post.
Last edited by mylesgm on Fri Mar 13, 2015 9:20 pm, edited 1 time in total.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: autumn cleaning sale
Hi Myles,
Some great stuff here. I'm keen on buying NS10 NOS woofer.
Also keen on the 1176-2 kits. Just to doublecheck, the hardware needed is just the xlr and iec connectors, correct? Has all components stuffed and matched FETs? attack switch pots? ratio switch row?
Call if easier.
Ph: 0410 546 696
Cheers,
Lachie.
Some great stuff here. I'm keen on buying NS10 NOS woofer.
Also keen on the 1176-2 kits. Just to doublecheck, the hardware needed is just the xlr and iec connectors, correct? Has all components stuffed and matched FETs? attack switch pots? ratio switch row?
Call if easier.
Ph: 0410 546 696
Cheers,
Lachie.
Lachlan Mitchell
(Producer, Engineer, Studio Owner)
junglestudios.com.au
atticstudios.com.au
(Producer, Engineer, Studio Owner)
junglestudios.com.au
atticstudios.com.au
- LachlanM
- Registered User

- Posts: 10
- Joined: Mon Sep 20, 2010 10:46 pm
Re: autumn cleaning sale
Hi Lachlan,
Most things have sold and I've now updated the list. The 1176-2 is fully complete minus the power transformer and case hardware (xlrs, knobs, etc). It is a rotating switch for the ratio and it also has the tabs to add a threshold control if you wish. Matched FETs across all positions and both boards, highest quality matched parts, etc. This was going to be a super mastering grade take on the 1176.
Most things have sold and I've now updated the list. The 1176-2 is fully complete minus the power transformer and case hardware (xlrs, knobs, etc). It is a rotating switch for the ratio and it also has the tabs to add a threshold control if you wish. Matched FETs across all positions and both boards, highest quality matched parts, etc. This was going to be a super mastering grade take on the 1176.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
4 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 15 guests